Version 6 (modified by gordonrachar, 12 years ago) |
---|
TracNav menu
-
Areas of Current Work
- Norwegian Continental Shelf
- MIMOSA
- JORD
- iRING
- Development of Standards
- Educational Material
- An Introduction to ISO 15926
-
What is ISO 15926...
- How ISO 15926 Works
- A Bit of History
- Long Tail
- Getting Started With ISO 15926
- Other ISO 15926 Resources
-
Introduction to ''An Introduction to ISO 15926''...
- About the Author
- ISO15926Primer_DiagnosticPage
Development and Harmonization of ISO 15926 Standards
EELCAT and AEX
Harmonization between:
- HI 50.7-2010 for Electronic Data Exchange for Pumping Equipment
- Fiatech’s Automated Equipment Exchange (AEX)
- ISO 15926
Many information standards exist today for various niches in heavy industry. Two such standards have recently been harmonized with ISO 15926. Under the guidance of FIATECH’s Engineered Equipment Life Cycle Application Tools project (EELCAT), what is known as the AEX XML schema (developed by another FIATECH project, Automated Equipment Information Exchange) and the Hydraulic Institute’s Standard HI 50.7-2010 for Electronic Data Exchange for Pumping Equipment have been brought together. HI 50.7 is a dictionary of data fields from many well-known standards along with the AEX schema. The EELCAT project has recently examined the two standards and has demonstrated how they can be further harmonized with ISO 15926.
Geometry SIG
Developing a reference library of 3D geometry
The Geometry Special Interest Group (Geometry SIG) of FIATECH and PCA is developing a reference library for the geometrical shapes used in 3D modeling software. Current tools for exchanging graphics strip out all of the meaning. (This means we can exchange the surfaces of plant objects but not their identity.) The geometrical reference library will be issued as ISO 15926 Part 3, which will allow us to exchange graphics as easily as we exchange other data.
Instrument SIG
Developing ISO 15926 templates for industrial instrumentation
The Geometry Special Interest Group (Geometry SIG) of FIATECH and PCA is developing a reference library for the geometrical shapes used in 3D modeling software. Current tools for exchanging graphics strip out all of the meaning. (This means we can exchange the surfaces of plant objects but not their identity.) The geometrical reference library will be issued as ISO 15926 Part 3, which will allow us to exchange graphics as easily as we exchange other data.
Next
Attachments
-
ISO15926Primer_26_CurrentEvents_Standards_a.png
(141.9 kB) - added by gordonrachar
12 years ago.
EELCAT, AEX, Hydraulic Institute
-
ISO15926Primer_26_CurrentEvents_Standards_c.png
(168.4 kB) - added by gordonrachar
12 years ago.
Instrumentation SIG
-
ISO15926Primer_26_CurrentEvents_Standards_b.2.png
(38.5 kB) - added by gordonrachar
12 years ago.
Geometry SIG