Decouple an Application from a Confederation of Applications

Status of this document: Working Draft

This document is open for feedback, please post questions and comments in the forum at the bottom of this page. You will need a login to post in the forum.

---

Contents

1. Abstract

Abstract

[Enter abstract]

---

In this example you have a number of applications that are linked by a common database. The custom maps will need maintenace whenever any of the applictions change. Even new updates to commercial software can break a link. You wish to be able to modify the applications without breaking the information flow to the database.

Error: Macro Image(GettingStarted_Decouple01.JPG, 300px) failed

Attachment 'wiki:ISO15926Primer_GettingStarted_Decouple: GettingStarted_Decouple01.JPG' does not exist.

Figure 1 - Applications Mapped to a Common Database

In order to isolate, say, Application A so that you can update it independently, you will need to create a map between it and the common database. Use ISO 15926-4 instead of making a custom map.

Error: Macro Image(GettingStarted_Decouple02.JPG, 350px) failed

Attachment 'wiki:ISO15926Primer_GettingStarted_Decouple: GettingStarted_Decouple02.JPG' does not exist.

Figure 2 - Map an Application to ISO 15926-4

Back to Getting Started

---

Discussion

You have no rights to see this discussion.