Automate a Manual Exchange

Status of this document: Ready for Cold Eyes Review

This document is open for feedback, please post questions and comments in the forum at the bottom of this page. You will need a login to post in the forum.

---

In this example your software applications are primarily stand-alone. Input for all applications is entered manually. If the input required for an application has already been created by an upstream software application, the information must be rekeyed anyway. What you would like to do is automate the data input for one of the applications.

Error: Macro Image(GettingStarted_Automate01.JPG, 600px) failed

Attachment 'wiki:ISO15926Primer_GettingStarted_Automate: GettingStarted_Automate01.JPG' does not exist.

Figure 1 - Manual Information Exchanges

To automate this you need to create a database map to transfer information from Application A to Application B. But instead of making a custom database map, make it to ISO 15926-4.

Error: Macro Image(GettingStarted_Automate02.JPG, 600px) failed

Attachment 'wiki:ISO15926Primer_GettingStarted_Automate: GettingStarted_Automate02.JPG' does not exist.

Figure 2 - Map Input of Application B to ISO 15926-4

Back to Getting Started

---

Discussion

You have no rights to see this discussion.