Oil, gas, and water volumes and rates measured during the well test.
The volumes allow either actual volumes or standard (corrected) volumes.
The densities are also recorded with the volumes.
Oil volumes measured during the well test.
Oil rates measured during the well test.
Gas volumes measured during the well test.
Gas rates measured during the well test.
Water volumes measured during the well test.
Water rates measured during the well test.
The ratio of the volume of gas and the volume of oil that was produced.
This is the condensate yeld, which describes the amount
of condensate per unit of natural gas produced
This is the measured of impurities present in crude oil
as it comes from the well. BSandW content is commonly used as a measure for
treating performance of hydrocarbon liquids
This is the the potential of the well to produce crude oil.
This represents the flow rate that could be achieved under maximum drawdown.
This is the potential of the well to produce natural gas.
This represents the flow rate that could be achieved under maximum drawdown.
the volume of sand that was produced.