Documentation for WITSML_Composite

Table of Contents

Master schema documentation file: WITSML_Composite.xsd.html


Schema Document Properties

Target Namespace
Version 1.3.1
Element and Attribute Namespaces
  • Global element and attribute declarations belong to this schema's target namespace.
  • By default, local element declarations belong to this schema's target namespace.
  • By default, local attribute declarations have no namespace.
Schema Composition

Declared Namespaces

Prefix Namespace
Schema Component Representation
<xsd:schema elementFormDefault="qualified" attributeFormDefault="unqualified" targetNamespace="" version="1.3.1">
<xsd:include schemaLocation="typ_dataTypes.xsd"/>
<xsd:include schemaLocation="typ_catalog_interval.xsd"/>

Global Definitions

Complex Type: cs_perforation

Super-types: None
Sub-types: None
Name cs_perforation
Abstract no
XML Instance Representation
<witsml:type> witsml:PerforationType </witsml:type> [0..1]

'The type of mechanism used to create the perforations.'

<witsml:shotCount> witsml:positiveCount </witsml:shotCount> [0..1]

'The total number of perforations in the interval.'

<witsml:shotDensity> witsml:perLengthMeasure </witsml:shotDensity> [0..1]

'The shot density of the perforated interval in number of perforations per length.'

<witsml:shotDiameter> witsml:lengthMeasure </witsml:shotDiameter> [0..1]

'The diameter of the perforation entrance holes.'

<witsml:shotLength> witsml:lengthMeasure </witsml:shotLength> [0..1]

'The average length of the perforations measured from the casing to the end of the perforation.'

<witsml:shotAngle> witsml:planeAngleMeasure </witsml:shotAngle> [0..1]

'The angular range of perforations created by a perforating gun set up for directional shooting, expressed clockwise from north. If perforations are from due north to due east, the angle is 90 degrees.'

<witsml:shotPhase> witsml:planeAngleMeasure </witsml:shotPhase> [0..1]

'The angle between perforations with respect to the centerline of the wellbore. Examples are 120 deg. for perforations oriented at 0, 120 and 240 deg., and 180 deg. for perforations oriented at opposite sides of the wellbore.'

<witsml:crushZoneDiameter> witsml:lengthMeasure </witsml:crushZoneDiameter> [0..1]

'The assumed diameter of the crushed zone in each perforation in the interval.'

<witsml:crushDamageRatio> witsml:unitlessQuantity </witsml:crushDamageRatio> [0..1]

'The ratio of the crush zone permeability to the damaged zone permeability around the perforations.'

<witsml:gunSize> witsml:lengthMeasure </witsml:gunSize> [0..1]

'The length of the gun.'

<witsml:gunType> witsml:kindString </witsml:gunType> [0..1]

'The type of gun used to create the perforation.'

<witsml:chargeSize> witsml:massMeasure </witsml:chargeSize> [0..1]

'The size of the explosive charge.'

<witsml:chargeType> witsml:kindString </witsml:chargeType> [0..1]

'The type of explosive charge.'

<witsml:formationName> witsml:nameString </witsml:formationName> [0..1]

'Name of formation penetrated.'

<witsml:lithostratigraphicName> witsml:nameString </witsml:lithostratigraphicName> [0..1]

'Name of formation, regionally dependent.'

h954947486 h-939241903 h2038822880 h283461459 h283461459 h1490166722 h1490166722 h283461459 h526607149 h283461459 h-399087894 h1236476485 h-399087894 h-269201247 h-269201247
Schema Component Representation
<xsd:complexType name="cs_perforation">
<xsd:element name="type" type=" witsml:PerforationType " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotCount" type=" witsml:positiveCount " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotDensity" type=" witsml:perLengthMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotDiameter" type=" witsml:lengthMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotLength" type=" witsml:lengthMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotAngle" type=" witsml:planeAngleMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="shotPhase" type=" witsml:planeAngleMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="crushZoneDiameter" type=" witsml:lengthMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="crushDamageRatio" type=" witsml:unitlessQuantity " minOccurs="0" maxOccurs="1"/>
<xsd:element name="gunSize" type=" witsml:lengthMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="gunType" type=" witsml:kindString " minOccurs="0" maxOccurs="1"/>
<xsd:element name="chargeSize" type=" witsml:massMeasure " minOccurs="0" maxOccurs="1"/>
<xsd:element name="chargeType" type=" witsml:kindString " minOccurs="0" maxOccurs="1"/>
<xsd:element name="formationName" type=" witsml:nameString " minOccurs="0" maxOccurs="1"/>
<xsd:element name="lithostratigraphicName" type=" witsml:nameString " minOccurs="0" maxOccurs="1"/>


Complex Type:

Schema Component Type


Schema Component Name
Super-types: Address < AusAddress (by extension)
  • QLDAddress (by restriction)
If this schema component is a type definition, its type hierarchy is shown in a gray-bordered box.
Name AusAddress
Abstract no
The table above displays the properties of this schema component.
XML Instance Representation
<... country="Australia" >
<unitNo> string </unitNo> [0..1]
<houseNo> string </houseNo> [1]
<street> string </street> [1]
Start Choice [1]
<city> string </city> [1]
<town> string </town> [1]
End Choice
<state> AusStates </state> [1]
<postcode> string <<pattern = [1-9][0-9]{3}>> </postcode> [1] ?

The XML Instance Representation table above shows the schema component's content as an XML instance.

Schema Component Representation
<complexType name="AusAddress">
<extension base=" Address ">
<element name="state" type=" AusStates "/>
<element name="postcode">
<restriction base=" string ">
<pattern value="[1-9][0-9]{3}"/>
<attribute name="country" type=" string " fixed="Australia"/>
The Schema Component Representation table above displays the underlying XML representation of the schema component. (Annotations are not shown.)


Abstract (Applies to complex type definitions and element declarations). An abstract element or complex type cannot used to validate an element instance. If there is a reference to an abstract element, only element declarations that can substitute the abstract element can be used to validate the instance. For references to abstract type definitions, only derived types can be used.

All Model Group Child elements can be provided in any order in instances. See:

Choice Model Group Only one from the list of child elements and model groups can be provided in instances. See:

Collapse Whitespace Policy Replace tab, line feed, and carriage return characters with space character (Unicode character 32). Then, collapse contiguous sequences of space characters into single space character, and remove leading and trailing space characters.

Disallowed Substitutions (Applies to element declarations). If substitution is specified, then substitution group members cannot be used in place of the given element declaration to validate element instances. If derivation methods, e.g. extension, restriction, are specified, then the given element declaration will not validate element instances that have types derived from the element declaration's type using the specified derivation methods. Normally, element instances can override their declaration's type by specifying an xsi:type attribute.

Key Constraint Like Uniqueness Constraint, but additionally requires that the specified value(s) must be provided. See:

Key Reference Constraint Ensures that the specified value(s) must match value(s) from a Key Constraint or Uniqueness Constraint. See:

Model Group Groups together element content, specifying the order in which the element content can occur and the number of times the group of element content may be repeated. See:

Nillable (Applies to element declarations). If an element declaration is nillable, instances can use the xsi:nil attribute. The xsi:nil attribute is the boolean attribute, nil, from the namespace. If an element instance has an xsi:nil attribute set to true, it can be left empty, even though its element declaration may have required content.

Notation A notation is used to identify the format of a piece of data. Values of elements and attributes that are of type, NOTATION, must come from the names of declared notations. See:

Preserve Whitespace Policy Preserve whitespaces exactly as they appear in instances.

Prohibited Derivations (Applies to type definitions). Derivation methods that cannot be used to create sub-types from a given type definition.

Prohibited Substitutions (Applies to complex type definitions). Prevents sub-types that have been derived using the specified derivation methods from validating element instances in place of the given type definition.

Replace Whitespace Policy Replace tab, line feed, and carriage return characters with space character (Unicode character 32).

Sequence Model Group Child elements and model groups must be provided in the specified order in instances. See:

Substitution Group Elements that are members of a substitution group can be used wherever the head element of the substitution group is referenced.

Substitution Group Exclusions (Applies to element declarations). Prohibits element declarations from nominating themselves as being able to substitute a given element declaration, if they have types that are derived from the original element's type using the specified derivation methods.

Target Namespace The target namespace identifies the namespace that components in this schema belongs to. If no target namespace is provided, then the schema components do not belong to any namespace.

Uniqueness Constraint Ensures uniqueness of an element/attribute value, or a combination of values, within a specified scope. See: